Chevrolet 1980 Light Duty Truck Repair Manual page 227

disassembly and reassembly
o f the direct and forward clutches.
7. R em ove interm ediate servo, cushion spring, and
washer from case from input ring gear.
8. R em ove thrust washer (Figure 7A 5-27). W asher has
3 tangs.
INTERM EDIATE
SERVO . ______
Figure 7A5-26 Intermediate Servo Removal
!
i n p u t r i n g g e a r
FRONT INPUT RING
GEAR THRUST WASHER
Figure 7A 5-27 Input Ring Gear & Thrust Washer Removal
9. R em ove input ring gear.
10. R em ove output carrier to output shaft snap ring
(Figure 7A 5-28).
11. R em ove input ring gear rear (output carrier) thrust
washer (Figure 7A5-29).
12. R em ove output carrier assem bly (Figure 7A 5-29).
13. R em ove sun gear drive shell assembly (Figure 7A 5-
30).
14. R em ove low and reverse roller clutch support to
case retaining ring (Figure 7A5-31).
15. R em ove low and reverse clutch support and race
assembly and anti-clunk spring (clutch retainer spring).
1'
A U T O M A TIC TR A N SM IS S IO N 7A5-5
INPUT RING GEAR
SNAP RING
Figure 7A 5-28 Output Shaft Snap Ring
OUTPUT CARRIER
T WASHER*
OUTPUT CARRIER'
Figure 7A 5-29 Output Carrier and Thrust Washer Removal
Figure 7A5-30 Sun Gear Drive Shell Removal
OUTPUT SHAFT