CYBEX Pro+ Owner's Service Manual page 59

Safety Sentry — This is how long the running belt will keep moving if the user steps off
the treadmill. Choices are between 0 seconds (none) and 60 second. Default is 20
seconds. Choosing "none" will disable this feature. NOTE: See Safety Sentry in Chapter 3
for further detail.
Remember: You must press Enter after changing a value for that value to be stored.
3. To exit Test Mode press the Stop key twice.
Your treadmill is now ready for use. Follow the instructions in the Operation chapter to learn how to
operate the treadmill. You should begin with walking speeds first, to be sure everything is
functioning properly.
Cybex Pro+ Treadmill Owner's & Service Manual
Setup
&
Assembly
Page 5-13