Servo Setting - MUTOH ValueJet 1604 Service Manual

5 Self-Diagnosis Mode

5.12 Servo Setting

In this menu, you can change the servo settings.
* Because this is a menu for evaluating problems of the unit (noise, vibration), and improving the image
(measures for vertical unevenness) normally, do not change these parameters.
Items
240 cps CW
240 cps CCW
320 cps CW
320cps CCW
Proportional gain
Integral gain
Low-pass filter
PWM scale
ω
C
Rev.-05
Table 5-17 Servo Setting Item
Servo setting at CR CW direction, 240 cps
Servo setting at CR CCW direction, 240 cps
Servo setting at CR CW direction, 320 cps
Servo setting at CR CCW direction, 320 cps
Table 5-18 Servo Adjustment Item
Items
Sets proportional gain
Sets integral gain
Sets low-pass filter
Sets PWM scale
ω
Sets
Contents
Contents
C
5-62
VJ-1604 Maintenance Manual