Replacing Leg Section; Replacing Waste Fluid Bottle - MUTOH ValueJet 1604 Service Manual

VJ-1604 Maintenance Manual

4.11 Replacing Leg Section

This section describes the procedure to replace the leg section.

4.11.1 Replacing Waste Fluid Bottle

• Discharge waste fluid fully to replace the waste fluid bottle.
• Confirm that there remains no waste fluid in the waste fluid tube.
1. Remove the side maintenance cover R.
"4.2.4 Removing Side Maintenance Cover R" p.4-11
2. Remove the connector to the level switch (waste fluid).
No.
3. Remove the waste fluid tube.
4. Loosen the cap of the waste fluid bottle.
1
2
1 Connector to the level switch (waste fluid)
2 Cover stay RR
Part name
4-149
4 Parts Replacement
Rev.-05