Replacing Cursor Roller Arm Assembly; Removing Print Head Cover - MUTOH ValueJet 1604 Service Manual

VJ-1604 Maintenance Manual
4.8.6

Replacing Cursor Roller Arm Assembly

1. Remove the head cover.
"4.8.6 Replacing Cursor Roller Arm Assembly" p.4-111
2. Lift up the cursor roller arm assembly to the direction shown below, and lift up the cursor arm spring.
Note that the tension of the cursor arm spring is high.
3. Confirm that the bearing is detached from the cursor guide.
4. Pull off the cursor roller arm to the direction shown below with the cursor arm spring being lifted up.
2
1
No.
5. Replace the cursor roller arm assembly.
Five parts are accompanied when removing the cursor roller arm. They are collectively called cursor
roller arm assembly except for the cursor arm spring.
6. To reassemble the unit, reverse the removal procedure.
4.8.7

Removing Print Head Cover

1. Open the maintenance cover R.
2. Remove the side top cover R.
"4.2.6 Removing Side Top Cover R" p.4-12
Left view
1 Cursor roller arm
2 Cursor arm spring
Part name
4-113
4 Parts Replacement
Right view
Rev.-05
2
1