Replacing Cr Origin Sensor - MUTOH ValueJet 1604 Service Manual

VJ-1604 Maintenance Manual
2
No.
12. To reassemble the unit, reverse the removal procedure.
4.7.5

Replacing CR Origin Sensor

1. Open the maintenance cover R.
2. Remove the side top cover R.
"4.2.6 Removing Side Top Cover R" p.4-12
3. Move the carriage to the left side (opposite side of the origin)
"4.8.1 Releasing Head Lock" p.4-106
4. Remove the CR_ORG cable assembly.
1 T fence guide plate
2 T fence
3 CR_ENC assembly
4 Carriage
1 4
Part name
4-97
4 Parts Replacement
3
Rev.-05