VJ-1604 Maintenance Manual
5.13.6 Endurance Running Check Menu
In this menu, you can confirm the number of endurance running cycles that have been already finished.
The number of endurance running cycles is stored in NVRAM in the system. Therefore, even if a serious error
occurs during endurance running, you can confirm the number of finished cycles just before the occurrence
of the serious error.
[>] key
[>] key
[>] key
[>] key
[>] key
[>] key
5.14 Media Feed Menu
In this menu, you can feed media into the plotter frontward or backward.
The mechanical initialization should be done if it is not performed yet.
This is the same function as the
[Enter]
[Enter]
[<] key
[<] key
[<] key
[<] key
[<] key
[<] key
[Enter]
"6.3.4 Media Feed Menu" p.6-7
5-71
Number of endurance running cycles
for the CR Motor
Number of endurance running cycles
for the PF Motor
Number of endurance running cycles
for the Head Lock
Number of endurance running cycles
for the Pump motor
Number of endurance running cycles
for Sequential Printing
Number of general endurance running cycles
[–] key: Feeds forward
[+] key: Feeds backward
5 Self-Diagnosis Mode
Rev.-05