Replacing Roll Media Holder Assembly; Replacing Roll Media Holder Assembly On The Vj16_L Side - MUTOH ValueJet 1604 Service Manual

VJ-1604 Maintenance Manual

4.12 Replacing Roll Media Holder Assembly

This section describes the procedure to replace the roll media holder assembly.

4.12.1 Replacing Roll Media Holder Assembly on the VJ16_L Side

1. Remove the media guide R (lower).
"4.2.19 Removing Media Guide R (Lower)" p.4-29
2. Release the roll media fixing lever.
No.
3. Pull out the roll media holder assembly on the VJ16_L side from the left side.
No.
4. Replace the roll media holder assembly on the VJ16_L side.
1
1 Roll media fixing lever
1
1 Roll media holder assembly on the VJ16_L side
2 Roll media holder assembly on the VJ16_R side
Part name
Part name
4-151
4 Parts Replacement
2
Rev.-05