Introduction; Product Specifications - MUTOH ValueJet 1604 Service Manual

3 Specifications

3.1 Introduction

This chapter explains the specifications of the product, optional parts, and supplies. Installation environment
requirements are also explained.

3.2 Product Specifications

(1) Main Unit Specifications
Item
Model name
Plotting method
Motor driving method
Media feeding method
Media fixing method
Media supply and Roll media
ejection
Roll media outer diameter
Roll media weight
Maximum media length
Maximum media width
Maximum media thickness
Maximum plot length
Maximum plot width
Plotting margins
Media cutting method
Head height adjustment
Distance accuracy
Right angle accuracy
CPU
Memory
Rev.-05
On-demand piezo drive
Firmware servo / DC motor drive
Multi-point pressure grid roller method
Pressurizing roller manual-down method
Rear feeding / front ejection
150 mm (5.9 in.) or less
Top: 15 mm, Bottom: 5 mm, Left: 5-25 mm, Right: 5-25 mm
2 levels: Normal / High
The larger value either ± 0.25 mm or ± 0.1% of moving distance
• Used media: Roll MF-3G
• Plot length: 1219 mm (4 ft.)
• Operating temperature: 22ºC to 30ºC (71.6ºF to 86ºF)
• Operating humidity: 40% to 60%
• PG: Low
• Plot mode: Graphics1
±0.1 mm or less against the moving distance (500.0 mm)
• Used media: Roll MF-3G
• Operating temperature: 22ºC to 30ºC (71.6ºF to 86ºF)
• Operating humidity: 40% to 60%
• Plot mode: Graphics1
3-2
VJ-1604 Maintenance Manual
Specifications
VJ-1604
30 kg (66 lb.) or less
50 m (164 ft.)
1625 mm (63.9 in.)
0.3 mm (0.01 in.)
18 m (59.1 ft.)
1615 mm (63.6 in.)
Horizontal manual cut
64Bit RISC CPU
256MB