Replacing Smc Two-Way Valve - MUTOH ValueJet 1604 Service Manual

VJ-1604 Maintenance Manual
8. Replace the two-way valve NX.
9. To reassemble the unit, reverse the removal procedure.

4.10.6 Replacing SMC Two-Way Valve

This section explains replacement procedures of SMC two-way valve.
The SMC two-way valve is used in
1. Remove the cartridge cover (lower).
"4.2.11 Removing Cartridge Cover (Lower)" p.4-19
2. Remove the cartridge cover (upper).
"4.2.9 Removing Cartridge Cover (Upper)" p.4-17
3. Remove the screws (8 pieces) that retain the SMC two-way valve.
No.
4. Detach the ink tube (2 pieces) from the SMC two-way valve.
VJ-1604K2 and some of VJ-1604A/VJ-1604E/VJ-1604J
2
2
1 SMC two-way valve mounting plate
2 Screws that retain the SMC two-way valve
(pan-head screw with spring washer and flat washer M3
6)
Part name
4-145
4 Parts Replacement
.
1
×
Rev.-05