Replacing Y Rail Section; Replacing Steel Belt - MUTOH ValueJet 1604 Service Manual

VJ-1604 Maintenance Manual

4.7 Replacing Y Rail Section

This section describes the procedure to replace the Y rail section.
4.7.1

Replacing Steel Belt

• When replacing the steel belt, be careful not to cut your hand with the steel belt.
• Steel belt replacement must be done by 2 or more persons.
Pay close attention in handling the steel belt. Bending or dust on the steel belt may cause steel belt
breakage.
1. Open the maintenance cover R.
2. Open the maintenance cover L.
3. Remove the side top cover R.
"4.2.6 Removing Side Top Cover R" p.4-12
4. Remove the side top cover L.
"4.2.7 Removing Side Top Cover L" p.4-14
5. Open the front cover.
6. Move the carriage to the left side (opposite side of the origin).
"4.8.1 Releasing Head Lock" p.4-106
4-87
4 Parts Replacement
Rev.-05