Lubrication/Bonding - MUTOH ValueJet 1604 Service Manual

8 Maintenance
No. Name
11 E ring holder (E-5)
12 Penlight
13 C ring pliers
(2) Tools for Adjustment
No. Name
1 Personal computer
2 Crossover cable
3 Tension gauge
4 Tension gauge
5 Straight scale (100 mm)
6 MF-3G
7 PG height check tool (64)

8.5 Lubrication/Bonding

This section covers the lubrication/bonding information.
After disassembling/assembling this plotter, always perform necessary lubrication/bonding according to
"Table 8-6 Lubricant List"
Only use specified lubricants and greases. The use of unauthorized lubricants and greases
may damage the components and shorten the plotter life.
Rev.-05
Table 8-4 Tools for Part Replacement(Continued)
Part number
Generic product
Generic product
Generic product
Table 8-5 Tools for Adjustment
Part number
Generic product
Generic product
Generic product
Generic product
Generic product
Exclusive use media For P_EDGE sensor, for print accuracy
JD-42796
p.8-7.
VJ-1604 Maintenance Manual
Name: JIS E-5
Manufacturer: Iwata Denko Co., Ltd
For replacing take-up flange assemblies
Printer port mounted
For installing firmware
Max. 4,080gf (40N) for measurement
Manufacturer: Ohba Keiki Seisakusho Co.,
Ltd.
Max. 204gf (2N) for measurement
Manufacturer: Ohba Keiki Seisakusho Co.,
Ltd.
-
adjustment
-
8-6
Remarks
Remarks