MUTOH ValueJet 1604 Service Manual page 312

7 Adjustment
Part replaced or
adjusted
Carriage assembly
Rev.-05
Table 7-1 Adjustment Item List(Continued)
Adjustment
order
1 PG height adjustment
2 CR belt tension adjustment
3 CR encoder inspection
4 P_EDGE sensor adjustment
5 Sequential printing endurance operation
check
6 Head rank input
7 Side margin adjustment
8 Head nozzle check
9 Head slant check
10 Head slant check
11 Uni-D / Bi-D Low Adjustment
Uni-D / Bi-D High Adjustment
12 Test printing
Adjustment item
7-6
VJ-1604 Maintenance Manual
Reference
"7.9 PG Height
Adjustment" p.7-39
"7.7 CR Speed
Reduction Belt
Tension Adjustment"
p.7-32
"5.5.5 Encoder
Menu" p.5-17
"7.10 P_EDGE
Sensor Sensitivity
Adjustment" p.7-41
"5.13.4 Print Head
Endurance (Nozzle
Print) Menu" p.5-69
"(1) Head Rank"
p.5-56
"5.13.4 Print Head
Endurance (Nozzle
Print) Menu" p.5-69
"5.7.6 Side Margin
Adjustment Menu"
p.5-40
"5.7.1 Head Nozzle
Check Menu" p.5-25
"5.7.3 Head Slant
Check Menu" p.5-28
"7.8 Head
Accuracy
Adjustment" p.7-35
"5.7.5 Uni-D/Bi-D
Low/High
Adjustment" p.5-35
"5.7.7 Test
Printing Menu" p.5-42