Panasonic KX-TVS120 Installation Manual page 47

g)
Wait until the "warning" appears on the screen.
h)
Set the DIP/Rotary Switch back to position 0.
CAUTION
If the DIP/Rotary Switch is not reset to position 0 after initialization, all programming
will be lost when the voice processor loses power!
6.
Perform Quick Setup (see Section 5 CUSTOMIZING THE SYSTEM).
7.
Check Quick Setup:
• The Power Indicator on the Voice Processor should be solid.
• The screen output should be: [On Line].
If you do not see the "On Line" message, check the following:
• The line cord to the Voice Processor has 4 conductors.
• The programming on the KX-TD816, KX-TD1232, KX-TA1232 or KX-TD308 is
correctly set in System Program [117].
• The programming on the KX-TD500 is correctly set in the "1-4 VPS (DPT) Port
Assignment" screen.
8.
Set up Class of Service (COS) for each user. Customize voice prompts if necessary (see
Appendix B SYSTEM ADMINISTRATOR'S GUIDE).
9.
Perform Administrative Program through a personal computer (see Appendix B SYSTEM
ADMINISTRATOR'S GUIDE).
CAUTION
Do not turn the power off while the VPS is activated so as not to cause malfunction.
To turn the power off after installing the VPS, unplug the power cord from the VPS a
few minutes after disconnecting station wire(s).
Installation Manual
INSTALLATION
47