Panasonic KX-TVS120 Installation Manual page 19

Inside View of the Main Cabinet—KX-TVS320
Internal Modem
Card
Grounding Strap
DIP Switch
Power Indicator
Note
Ports 1-24 are at TNV.
System Components
Power Indicator:
Indicates the system status: when flashing, the system is off-line (not ready to receive calls).
RS-232C Connector:
Connects an ASCII or VT terminal to the VPS that is necessary to program the system.
Ground Terminal:
Should be connected to a ground source with less than 1
Fuse:
Protects the system from power line surges and should only be replaced with the same type.
Please see the fuse socket on the cabinet for the value of the fuse.
AC Inlet:
Connects the power cable to an AC outlet dedicated to the VPS.
Power Switch:
Starts the system and begins the self-test.
SAFETY PRECAUTION: When making any connections or removing the cover, be sure the
power switch is switched off.
Internal Modem Card—KX-TVS320:
Modem card for remote administration.
Installation Manual
MODEM SLOT 6 SLOT 5 SLOT 4 SLOT 3 SLOT 2 SLOT 1
VOICE PROCESSING SYSTEM OVERVIEW
Slots For
Optional Port
Cards
Factory-installed
KX-TVS204 card
3.5" Hard Disk
Drive
Ferrite Cores
Cable Clip
resistance.
19