To Mount on a Concrete or Mortar Wall:
1.
Place the template on the wall to mark the 3 screw positions.
2.
Drill 3 holes and drive the anchor plugs (included) with a hammer, flush with the wall.
To the wall surface
3.
Install the 3 screws into the anchor plugs.
Drive the screw
to this position.
4.
Hook the unit on the screw heads.
Installation Manual
Template
Concrete or
Mortar Wall
Anchor Plug
29 mm
(1-1/8 inch)
6.4 mm
(1/4 inch)
INSTALLATION
43