Panasonic KX-TVS120 Installation Manual page 312

SYSTEM ADMINISTRATOR'S GUIDE
To access the proper menu for Inband Signaling Parameters, follow the menu path
as shown:
System Administration Top Menu-1-6-3-2
The following parameters can be programmed using "0-9", " ", "#", and "A-D".
Parameter
Ringback
Busy
Reorder
DND
Answer
Forward to VM
Ringing
Forward to VM
Busy
Forward to
Other
Extension
Confirmation
Disconnect
Note
Default values in the above table vary depending on the settings of "PBX type" and "Inband
Integration" (PBX Interface Parameters).
312
Table 80
Value Range
(Default)
Indicates "Ringback Tone". Sent to the VPS when the
(1)
extension dialed is ringing.
Indicates "Busy Tone". Sent to the VPS when the
(2)
extension dialed is busy.
Indicates "Reorder Tone". Sent to the VPS when an
(3) invalid extension number is dialed or when inadvertently
connected to another VPS.
Indicates "Do Not Disturb Tone". Sent to the VPS if the
(4)
dialed extension has the Do Not Disturb feature enabled.
Sent to the VPS when the called extension answers the
(5)
call.
Sent to the VPS if the called extension is forwarded to a
(6) voice mail port and that voice mail port is available to
accept the call.
Sent to the VPS if the called extension is forwarded to a
(7) voice mail port and that voice mail port is not available to
accept the call.
Sent to the VPS if the called extension is forwarded to
another, non-Voice Mail extension.
(8)
Sent to the VPS when it successfully dialed a Message
(9)
Waiting Lamp On or Message Waiting Lamp Off Code.
(#9) Sent to the VPS when the other party goes "on-hook".
Description/Function
Installation Manual