Panasonic KX-TVS120 Installation Manual page 338

SYSTEM MANAGER'S GUIDE
example, to specify the mailbox range 1001 through 1209, enter 1001 in Step 5 and 1209
in Step 6.
Note
While the System Administrator programs via a personal computer, a System Report
will not be generated. The System Report starts to be generated after the System
Administrator has completed programming and system prompt [>] is displayed on the
personal computer.
Clearing the Reports
The Port Usage, Disk Usage, Mailbox Usage, and Fax Call Reports can be cleared.
1.
Log in the Main Menu.
2.
Press [5] for the System Report Menu.
3.
Press [2] to clear the Disk Usage Reports, [3] to clear the Port Usage Reports, [4] to clear
the Mailbox Usage Reports, or [8] to clear the Fax Call Report.
4.
Press [2] to clear the report. To clear the Mailbox Usage Reports, Go to Step 5.
5.
Type the mailbox number of the start of the range.
Note
If a [#] is entered in place of each digit of the mailbox numbers (e.g., # # # for 3-digit
mailbox numbers), reports for all mailboxes will be cleared and the System Report
Menu will appear. In this case, Step 6 can be skipped.
6.
Press [1] to specify the mailbox range, and Type the mailbox number of the end of the
range. Press [2] to clear all Mailbox Usage Reports.
338 Installation Manual