Panasonic KX-TVS120 Installation Manual page 21

MODE (Rotary Switch)—KX-TVS120 and KX-TVS220:
By setting one of the following positions and executing power down and up, you can achieve
a desired result:
Position
0
1
2*
3*
4
5
6
7
8
9
* For Panasonic KX-T series telephone system with DPT Integration.
When setting the DIP/Rotary Switch to any position (except 0):
1. Disconnect the station wire(s) and wait a few minutes.
2. Turn the power switch off at the VPS.
3. Set the DIP/Rotary Switch.
4. Turn the power switch back on at the VPS.
5. Connect the station wire(s) to the VPS and wait approximately 5 min.
6. Return the DIP/Rotary Switch to position 0.
Grounding Strap:
Protects the printed circuit board from static electricity.
(Ground) SAFETY PRECAUTION: Discharge any body static by touching the metal bar.
Installation Manual
Table 2
Additional Function
Normal setting.
Initializes RS-232C parameters.
RS-232 default parameters: 9,600, N, 8, 1
Auto Configuration is automatically completed
and all ports are set for Automated Attendant
service.
Auto Configuration is automatically completed
and all ports are set for Voice Mail service.
Reserved
Initializes the VPS. Clears all voice data (except
User 1 and User 2 prompts) and returns all system
parameters to the default setting.
Test Mode (Hard Disk Drive Read/Write Test)
Reserved
Initializes the VPS. Clears all voice data and
returns all system parameters to the default setting.
CAUTION: User 1 and User 2 Prompts will be
erased!
Reserved
VOICE PROCESSING SYSTEM OVERVIEW
21