Custom Service Menu Access Count Clear (Cclr); Message Waiting Lamp Retry Times (Mwl) - Panasonic KX-TVS120 Installation Manual

[1]-Custom [1]:
[2]-Custom [2]:
[3]-Custom [3]:
[4]-Dept Dial:

7.2.12 Custom Service Menu Access Count Clear (CCLR)

Each Custom Service has an access counter that counts the number of times the service has
been accessed. This command clears this counter.
Type CCLR, Press Space, and Enter Custom Service Menu (1-100), then Press RETURN.
$ CCLR 20
Custom Menu <20> Access Counter Cleared !!
Note
Type CCLR 0 to clear the access counters of all Custom Services.

7.2.13 Message Waiting Lamp Retry Times (MWL)

Use the MWL command to specify the number of times the VPS will attempt to turn on the
Message Waiting Lamp of the called extension. Apply this setting when a PBX other than the
Panasonic KX-T series telephone system is used.
$ MWL
Current Setting of M.W.L. Retry Count is 3
Enter M.W.L. Retry Count (1-3) =
Note
This setting is not valid if "Message Waiting Lamp for Every Message" is set to "Yes".
Installation Manual
SYSTEM MAINTENANCE AND TROUBLESHOOTING
Custom Service 1 will play when the "1" key is pressed.
Custom Service 2 will play when the "2" key is pressed.
Custom Service 3 will play when the "3" key is pressed.
Department Dialing menu will play when the "4" is
pressed.
185