Panasonic KX-TVS120 Installation Manual page 255

Parameter
Intercom
Paging Group
Prompt Mode
Remote Call
Forward to CO
Delete
Message
Confirmation
Number of
CIDs for Caller
Name
Announcement
Installation Manual
Value Range
(Default)
1-17 Specifies the Intercom Paging group number available to
(Group 1) the subscriber.
If set to "17", the Intercom Paging feature is activated for
all groups.
Note: The Intercom Paging feature is available if DPT
Voice Mail Integration is activated with a Panasonic KX-
T series telephone system.
1. System Specifies the language used for voice prompts played for
2. User 1 the subscriber during a Message Waiting Notification
3. User 2 Call and Subscriber Service.
(User 1)
Note: If the specified Prompts are not recorded by the
Message Manager, the VPS will automatically play the
factory-recorded System prompts in English.
1. Yes If set to "Yes", Remote Call Forwarding can be set to an
2. No outside (CO) line; a subscriber can program his
(No) extension from a remote location to forward various
types of calls to either "Telephone No.1" or "Telephone
No.2" (preprogrammed in the Mailbox Setting), or to
any other telephone number.
Note: The Remote Call FWD to CO feature is available
if DPT Voice Mail Integration is activated with a
Panasonic KX-T series telephone system.
Important Note: With respect to PBX programming, it
is possible that "Call Forward to CO" is disabled. To
enable VPS Remote Call Forwarding, the KX-TD1232,
for example, must be programmed properly. For the COS
of the extensions whose calls are to be forwarded to a CO
line, enable the following: [504] Call Forward to Outside
Line.
1. Yes If set to "Yes", the VPS requests confirmation from the
2. No mailbox owner before erasing a message left in the
(No) mailbox. If set to "No", the message is erased
immediately.
0-30 Specifies the maximum number of Caller IDs which
(30) subscribers can assign for the Personal Caller Name
Announcement.
SYSTEM ADMINISTRATOR'S GUIDE
Table 44
Description/Function
255