Panasonic KX-TVS120 Installation Manual page 213

FEATURE
Caller ID Call allows the System Administrator to assign up
Routing to 120 Caller ID numbers and program the
(DPT Integration route for the calls from these assigned
Only) numbers to the desired extension, mailbox
(System Group Distribution List included) or
Custom Service.
The Company Greetings will not play when
calls are routed as programmed by this
feature.
Caller ID Screening allows extension users to hear prerecorded
(DPT Integration caller names when calls from assigned
Only) numbers are transferred from the VPS to the
extension users.
Caller Name allows subscribers to assign up to 30 Caller
Announcement— ID numbers and record a caller name for each
Personal Caller ID number from their telephone. The
(DPT Integration caller name is announced when: (1)
Only) subscribers listen to the messages from
assigned numbers left in their mailboxes, (2)
the VPS transfers calls from assigned
numbers to the subscribers (Caller ID
Screening), and (3) the VPS pages the
subscribers by intercom (Intercom Paging).
Caller ID Screening is enabled or disabled in
the COS (Class of Service) settings.
If the same Caller ID number is programmed
for both the system and personal caller name
announcement, the VPS will use the personal
caller name.
Installation Manual
Table 37
DESCRIPTION
SYSTEM FEATURES
REFERENCES
• See 4.1 GUIDELINES FOR
DPT INTEGRATION.
• See B5.3 Caller ID Call
Routing Parameters.
• See "Caller ID Call Routing" in
Glossary.
• See "Caller Name
Announcement—Personal" and
"Caller Name Announcement—
System" in this Table.
• See 4.1 GUIDELINES FOR
DPT INTEGRATION.
• See "Number of CIDs for Caller
Name Announcement" and
"Caller ID Screening" in Table
44 in B3 SYSTEM
ADMINISTRATION—
SETTING COS (CLASS OF
SERVICE) PARAMETERS.
• See C3 SETTING COS
(CLASS OF SERVICE)
PARAMETERS.
• See "Caller Name
Announcement (System/
Personal)" in Glossary.
• See 4.12 Personal Caller Name
Announcement in the
Subscriber's Guide.
213