Panasonic KX-TVS120 Installation Manual page 257

Parameter
MWL
Notification for
Unreceived
Message
Device
Notification for
Unreceived
Message
Authorization
for External
Message
Delivery
Prompt Mode
Authorization
for Auto
Forwarding
Mailbox
Number
Delay Time
Installation Manual
Value Range
(Default)
1. Yes If set to "Yes", the message waiting lamp will illuminate
2. No when unplayed messages remain after the subscriber has
(Yes) accessed the mailbox for Subscriber Service.
1. Yes If set to "Yes", the VPS calls the appropriate device in
2. No numerical order until all unplayed messages are
(No) received.
1. Yes If set to "Yes", subscribers are able to utilize the External
2. No Message Delivery feature. The sub-parameter to be set is
(No) Prompt Mode. If set to "No", sub-parameter cannot be
assigned.
1. System When an external message is delivered, the receiver will
2. User 1 be greeted by the VPS in the specified language
3. User 2 (prompt). However, if "Selective" is enabled, then the
4. Selective receiver has a choice of prompts. See related explanation
(User 1) in "Incoming Call Service Prompt" in Table 26 in
5.3.1 Port Service Menu.
Note: When "Selective" is enabled and the receiver uses
a rotary telephone, the no-entry selection is specified by
"Prompt for Rotary Callers" in Table 26 in 5.3.1 Port
Service Menu.
1. Yes If set to "Yes", the VPS automatically forwards messages
2. No that have not been accessed for a specific length of time
(No) to another mailbox. The sub-parameters to be set for this
feature include Mailbox Number, Delay Time, and
Forwarding Mode. If set to "No", sub-parameters cannot
be assigned.
2-5 digits Specifies the mailbox to which the messages will be
(None) forwarded.
Note: The numbers of the System Group Distribution
List cannot be specified as the destination.
(h) (min) Specifies the length of time in hours and minutes that the
VPS must wait before forwarding unretrieved messages.
00:05 to 99:59
The maximum delay time is 99 h, 59 min.
(00:30)
Note: The delay time must be less than the New Message
Retention Time, or else messages will be deleted before
being forwarded.
SYSTEM ADMINISTRATOR'S GUIDE
Table 44
Description/Function
257