Panasonic KX-TVS120 Installation Manual page 256

SYSTEM ADMINISTRATOR'S GUIDE
Parameter
Personal
Greeting for
CID
Caller ID
Screening
Authorization
for Message
Notification
Beeper
Callback
No. Entry
Mode
256
Value Range
(Default)
1. Yes If set to "Yes", subscribers can utilize the personal
2. No greeting feature for Caller ID.
(Yes)
1. Yes If set to "Yes", subscribers can utilize the Caller ID
2. No Screening feature.
(Yes)
1. Yes If set to "Yes", subscribers are able to utilize the Message
2. No Waiting Notification feature. The sub-parameters to be
(No) set include Beeper Callback No. Entry Mode, MWL
Notification for Unreceived Message, and Device
Notification for Unreceived Message. If set to "No", sub-
parameters cannot be assigned.
Note: This parameter in COS No.1 is set to "Yes" when
the Quick Setup procedure is used to create Subscriber
Mailboxes.
1. Caller Select Permits subscribers to use the Callback Number Entry
2. Without feature.
3. Before
4. After
Caller
5. Disable
Select:
(Disable)
Without:
Before:
After:
Disable:
Note: To utilize this feature, the callback number entry
code must be included in the subscriber's beeper number.
When "Disable" is selected or if the caller does not enter
a callback number, "System Callback No." (see Table
67) will be displayed on the beeper's display. If a caller's
number is received through a telephone company's
Caller ID service, the caller's number will be displayed
instead of "System Callback No.".
Table 44
Description/Function
After recording a message, the caller is
asked if the message is urgent. If urgent, the
caller is asked to enter the callback number.
Without recording a message, the caller is
asked to enter the callback number.
Before recording a message, the VPS asks
the caller to enter the callback number.
After recording a message, the VPS asks
the caller to enter the callback number.
Disables the Callback Number Entry
feature.
Installation Manual