OfficeServ 7200
TECHNICAL MANUAL
2) Align the MCP/MP20 board to the guardrails of slot 0 of the main cabinet, and slide the
MCP/MP20 board into the slot.
3) Push the front panel lever until the board is completely inserted into the OfficeServ 7200
slot 0.
4) The above steps 2~3 also apply to installing the LCP board to slot 0 of the expansion
cabinet.
Figure 3.4 Installing the Processor Board (1)
Figure 3.5 Installing the Processor Board (2)
3.7
Table of Contents
Home Page
INSTALLATION
PART 3 MAY 2010