Chapter 8. Installing Kdb (Keyset Daughter Board); Idcs Fkdbd (Kdb-Digital Line Interface); Idcs Fkdbs (Kdb-Single Line Interface) - Samsung OfficeServ 100 Installation Manual

CHAPTER 8.
Daughter Board)
This chapter describes how to install the KDB(Keyset daughter Board) to the phone.

8.1 iDCS FKDBD (KDB-Digital Line Interface)

This is a daughter board that can be installed only in the 18 or 28 button phone.
The FKDBD will provide one additional DLI circuit for the connection of any digital
station device such as a phone, add-on module or DPIM. This FKDBD will only operate
when the phone is connected to an 8 port DLI in the 008 base board so it can use the
second B channel.

8.2 iDCS FKDBS (KDB-Single Line Interface)

This is a daughter board that can be installed only in the 18 or 28 button phone.
The FKDBS will provide one additional SLI circuit for the connection of any standard
telephone device.
This FKDBS will only operate when the phone is connected to an 8 port DLI in the 008
base board it can use the second B channel. Each port on this card is intended for
connection to one telephone.
Connecting multiple telephones to a port may result in incorrect operation or damage to the card
© SAMSUNG Electronics Co., Ltd.
Installing KDB (Keyset
FKDBD
The 'F' in 'FKDBD' stands for Fashion implying that FKDBD is a Fashion keyset
model among various types of KDBD keysets
When using FKDBS
The circuitry on a FKDBS does not provide a loop open disconnect signal or have
the over-voltage protection necessary for OPX operation.
OfficeServ 100 Installation Manual
8-1