Table 7.7 Modem Configuration - Samsung OfficeServ 7200 Technical Manual

OfficeServ 7200
TECHNICAL MANUAL
OPTION
The [Option] tab may be selected to set additional information regarding the modem
connection (between the OIT and the key phone system.)
Once a site is defined and displayed in the bottom section of the <Link Control> window,
simply click on the
The icon is used to upload OfficeServ system files to the storage media.
Refer to the following table to configure the modem's options:
Field
Dial Retry Used to set the number of attempts (dial counts) for the modem connection.
Dial Duration Used to set the connection time (uptime) for the modem connection.
INIT CMD Used to set the modem's initialization command.
Figure 7.41 Link Control: Option Tab
icon to connect to the MP10/MP10a/MCP/MP20/MP40.

Table 7.7 Modem Configuration

Details
7.45
INSTALLATION
PART 7 MAY 2010