Table 3.19 Ports And Leds Of The Gsimt - Samsung OfficeServ 7200 Technical Manual

OfficeServ 7200
TECHNICAL MANUAL
Specification
The specification of the GSIMT data board is as follows. 12 10/100/1000 Base- TX interface
ports
FRONT VIEW OF THE GSIMT BOARD
The front view of the GSIMT data board is shown in the figure below.
The components on the front panel of the GSIMT board have the functions below:
Ports & LEDs
P1~P12
SIO
DBL
Left LED of P1~P6
Right LED of P1~P6
PWR LED
RUN LED
Figure 3.41 Front View of the GSIMT

Table 3.19 Ports and LEDs of the GSIMT

Function Description
Ports that connect to the 10/100/1000 Base-TX GbE (Gigabit Ethernet)
Port that connects to the RS-232
Port that connects to the LAN for debugging purpose
Indicates whether the P1~P6 are operating in 10/100/1000 BASE-TX
mode
- Alternates between green and orange: In operation as 10 Base-T
- Green Light: In operation as 100 Base-TX (blinks if active)
- Orange Light : In operation as 1000 Base-TX (blinks if active)
Indicates whether the P7~P12 are operating in 10/100/1000 Base-TX
mode
- Alternates between green and orange: In operation as 10 Base-T
- Green Light: In operation as 100 Base-TX (blinks if active)
- Orange Light: In operation as 1000 Base-TX (blinks if active)
Power Supply Status
- On: The power is being supplied normally
GSIMT Operation Status
- Blinking: The RAM programming is running
3.41
Table of Contents
Home Page
INSTALLATION
PART 3 MAY 2010