Samsung OfficeServ 7200 Technical Manual page 137

OfficeServ 7200
TECHNICAL MANUAL
Board Reset
New settings are applied only after the board is reset. The system may malfunction if
the board is not properly initialized.
SETTING REMOTE OSM PARAMETERS
1) Execute OSM.
2) Click [Link]  [CommSetup] menu on the OfficeServ Manager main screen.
3) Enter the system name into the [Address] field of the <Communications Setup> window.
4) Enter the IP address of the system into the [Number] field.
Figure 7.36 OSM Screen
Figure 7.37 Setting OSM Parameters
7.39
INSTALLATION
PART 7 MAY 2010