Samsung OfficeServ 7200 Technical Manual page 120

OfficeServ 7200
TECHNICAL MANUAL
64 BUTTON MODULES
Using one pair twisted #24 AWG or #26 AWG jumper wire, cross-connect each 64 button
module (64 BM) to the DLI port or plug into the KDb-DLI of your choice
installation section). The 64 BM module can be assigned to any keyset telephone. It must be
assigned to that station in MMC 209.
TDM 64 Button AOM
IP 64 Button AOM
CAUTION: To reduce the risk of fire, use only No. 26 AWG or larger telecommunication line
cord.
MAXIMUM AOM CAPACITIES
Maximum per Station
4
4
Figure 7.23 Attaching 24B/12B to 64 Button Module
7.22
Home Page
INSTALLATION
PART 7 MAY 2010
(see part 7.1.8 of this
Maximum per System
Limited by available DLI ports
Limited by available
IP/Virtual Ports
Table of Contents