Samsung OfficeServ 7200 Technical Manual page 151

Table of Contents
Home Page
OfficeServ 7200 INSTALLATION
TECHNICAL MANUAL PART 9 MAY 2010
immediately after setting programming to "Disabled" then exiting. When using Installation
Tool to save database files name them with dates so you know what database your are
restoring.
Defaulting the Database
When it is necessary to wipe out (default) the customer database on the MP20, press and hold
the RESET button for 10 seconds until the RUN LED lights steady amber, then release the reset
button. The system will reboot and come up with a default database based on current
hardware configuration and DIP switch S3 settings on MP20 card.
An alternative method is to use a MMC 811- System Restart from a keyset. Execute the " Clear
Memory" option followed by the "System Restart" option.
9.3