Table 3.21 Oas Front Panel Components - Samsung OfficeServ 7200 Technical Manual

OfficeServ 7200
TECHNICAL MANUAL
Ports & LEDs
LAN Port that connects the Ethernet.
SIO Serial Port (for Samsung Use ONLY)
RST Button for resetting the OAS.
PWR LED This LED indicates the power supply status.
- Off: Power is not being supplied.
- On: Power is being supplied properly.
RUN LED This LED indicates MP20S status.
- Off: Power is not being supplied.
- On: Booting.
- Blink: The RAM program is operating.
LAN Tx LED This LED indicates the transmit status of the LAN port.
- Off: Data is not being transmitted.
- On or blink: Data is being transmitted.
LAN Rx LED This LED indicates the receive status of the LAN port.
- Off: Data is not being received.
- On or blink: Data is being received.
SVC1 LED This LED indicates if the MOBEX DSP service is being offered.
- This LED blinks when program is being modified or configuration is being loaded.
SVC2 LED
This LED indicates if the LAN connection is alive.
- This LED blinks when program is being modified or configuration is being loaded.
SVC3 LED
This LED indicates if the MPS channel service is being offered.
- This LED blinks when program is being modified or configuration is being loaded.
SVC4 LED
This LED indicates if the MGI channel service is being offered.
- This LED blinks when program is being modified or configuration is being loaded.
Figure 3.45 Front View of the OAS

Table 3.21 OAS Front Panel Components

Function Description
3.46
Table of Contents
Home Page
INSTALLATION
PART 3 MAY 2010