Table 3.20 Ports And Leds Of The Mgi-16 - Samsung OfficeServ 7200 Technical Manual

OfficeServ 7200
TECHNICAL MANUAL
The components on the front panel of the MGI-16 have the functions below:
Ports & LEDs
LAN
SIO
RST
PWR LED
RUN LED
LAN Tx LED
LAN Rx LED
SVC LED
DSP LED
RTPT LED
RTPR LED

Table 3.20 Ports and LEDs of the MGI-16

Function Description
Port that connects the Ethernet.
Serial Port (for Samsung Use ONLY)
Button for resetting the MGI/MGI-16.
This LED indicates the power supply status.
- Off: Power is not being supplied.
- On: Power is being supplied properly.
This LED indicates MCP/MP20 status.
- Off: Power is not being supplied.
- On: Booting.
- Blink: The RAM program is operating.
This LED indicates the transmit status of the LAN port.
- Off: Data is not being transmitted.
- On or blink: Data is being transmitted.
This LED indicates the receive status of the LAN port.
- Off: Data is not being received.
- On or blink: Data is being received.
This LED indicates if the service is being offered.
- This LED blinks when program is being modified or configuration is being
loaded.
This LED indicates if the VoIP DSP is operating.
- This LED blinks when the VoIP channels are engaged.
This LED indicates if the voice packets are being forwarded.
- This LED turns on when the voice packets are forwarded.
This LED indicates if the voice packets are being received.
- This LED turns on when the voice packets are received.
3.44
Table of Contents
Home Page
INSTALLATION
PART 3 MAY 2010