218: Impresser Problem; 219: Impresser Sensor Problem; 220: Impresser Heater Problem; 221: Bar Code Scanner Problem - DataCard CD800 User Manual

218: Impresser problem

The laminator has encountered a critical error. The card will be canceled.
1.
Press the printer Power button to power off the system.
2.
Request service. The system must remain powered off.

219: Impresser sensor problem

The laminator has encountered a critical error. The card will be canceled.
1.
Press the printer Power button to power off the system.
2.
Request service. The system must remain powered off.

220: Impresser heater problem

The laminator has encountered a critical error. The card will be canceled.
1.
Press the printer Power button to power off the system.
2.
Request service. The system must remain powered off.

221: Bar code scanner problem

1.
Open the laminator and remove the L1 cartridge.
2.
Verify the supply has bar codes printed on it.
3.
Replace the cartridge and close the laminator.
4.
Try the card again.
5.
If the problem occurs again, request service.

222: Firmware version mismatch

The printer and laminator firmware versions are not compatible. The system
cannot laminate cards until the firmware has been updated.
Update both the printer and laminator to the latest firmware versions.

223: Laminator system mismatch

The printer and laminator are not compatible.
The laminator is not supported by your printer model. Contact your service
provider for the correct laminator model.
CD800 Card Printer User's Guide 81