Load Laminator Overlay Material - DataCard CD800 User Manual

Load Laminator Overlay Material

Load the overlay material in one laminator cartridge at a time.
The L1 (green) and L2 (orange) cartridges fit only in their assigned locations
inside the laminator. They are not interchangeable.
1.
Unlock and open the laminator
access door.
2.
Remove the L1 (green) laminator
cartridge from the printer. Place
the cartridge on a smooth level
surface for loading.
3.
Push the release latch (a) and
open the gate on the laminator
cartridge (b).
4.
Remove both used spools from the cartridge (if present).
CD800 Card Printer User's Guide A-9