Printer with Single Input Hopper
Cover
Latch Button
Cover Ridges
Ribbon Cartridge
Handle
Card Input Hopper
Front Panel
Output Hopper
6
Cover
Cover Ridges
Card Input
Hopper
Output
Hopper
Open the cover to access the printhead and ribbon.
Push the latch button to release the cover and open
the printer.
Press down on the ridges when closing the cover to
make sure that it latches properly on both sides.
Use the handle to remove the print ribbon cartridge
from the printer.
The input hopper loads cards to print. The hopper
holds up to 100 cards (0.030 in. or 0.762 mm thickness).
The front panel lets you work with the printer. It
includes the U
button, and the LCD panel with navigation keys.
The output hopper holds up to 25 completed cards.
Front Panel
button, the status lights, the power
SER
Latch Button
Ribbon Cartridge
Handle
About the Printer