Respond To Messages; Printer Messages; 100: Request Not Supported; 101: Job Could Not Complete - DataCard CD800 User Manual

Respond to Messages

You can respond to printer messages using the printer front panel buttons or by
clicking the appropriate response in the message box displayed by the Card
Printer Driver on the PC.

Printer Messages

The following messages display on the printer LCD panel and in a message box on
the PC that issued the card print job when you use the Card Printer Driver.

100: Request not supported

The printer does not support the personalization being requested for the card.
The card will be canceled.
Change the card data to match the printer's options and settings, or print to a
printer that is configured to support the personalization being requested.
Press the U
message.

101: Job could not complete

The card took too much time to complete.
The card will be canceled.
Press the U
message.

102: Card not in position

The card is not positioned in the printer correctly.
1.
Open the printer and remove the ribbon cartridge.
2.
Turn the knob to remove the card.
3.
Replace the ribbon cartridge and close the printer.
Press the U
Cancel to cancel the card.
CD800 Card Printer User's Guide
button on the printer, or click OK in the message box to clear the
SER
button on the printer, or click OK in the message box to clear the
SER
button on the printer. In the message box, click Retry, or click
SER
67