118: Print Ribbon Type Problem; 119: Print Ribbon Not Supported; 120: User Paused The Printer - DataCard CD800 User Manual

118: Print ribbon type problem

The printer cannot use the ribbon installed. The card will be canceled.
Use ribbon designed for this printer.
Press the U
message.
H & T
INTS
Purchase ribbon from your dealer or authorized reseller.
•
Check the Datacard website for newer firmware that supports new ribbon
•
types.

119: Print ribbon not supported

The printer cannot use the ribbon installed. The card will be canceled.
Use ribbon designed for this printer.
Press the U
message.
H & T
INTS
Purchase ribbon from your dealer or authorized reseller.
•
Check the Datacard website for newer firmware that supports new ribbon
•
types.

120: User paused the printer

The printer was paused while printing.
To complete the current card press the printer's U
In the message box, click OK to clear the message and complete the current card,
or click Cancel to cancel the card.
H & T
INTS
If the user pressed the U
•
canceled.
If this message occurs often, ask your system administrator to set the button
•
sensitivity to a lower value.
CD800 Card Printer User's Guide
button on the printer, or click OK in the message box to clear the
SER
IPS
button on the printer, or click OK in the message box to clear the
SER
IPS
IPS
SER
SER
button for several seconds, the card has been
button.
73