Laminator Material - DataCard Sp35 Installation Manual

Monochrome and Topcoat ribbon
Ribbon with alternating Monochrome (K) and Topcoat (T) panels is available for SP Series printers as part of the
KT Color Ribbon Kit, part number 552854-509. A roll of ribbon prints up to 1000 images.
Monochrome print ribbon
Several colors of monochrome (single-color) print ribbon are available for SP Series printers. A roll of ribbon prints
up to 1500 images (if ribbon-saver is not used).
Available colors include:
Color
Black
Black HQ
Dark Blue
White
Red
Green
Silver
Gold
Scratch-off
Metallic Silver
Metallic Gold
Metallic Holographic
Fleck
When you use most monochrome-only print ribbons in SP35, SP55, and SP60 printers, use a printhead cartridge
designed for monochrome printing for optimum results. For most card designs, you can print with a Black HQ
ribbon using a color printhead. When you use a color ribbon that includes a K (monochrome or black) panel, use a
color printhead cartridge. See

Laminator material

This section applies only to the SP75 printer.
Datacard provides two types of materials for use in laminators:
• Datacard® Duragard® laminate, which has die-cut patches sized to fit on a card
• Topcoat, which is a continuous film
For more information about these materials, see
Available laminator material includes:
Name
SP Series Supply e-Guide
SP35
Part number
printer?
552954-501 Yes
552954-601 No
552954-502 Yes
552954-503 Yes
552954-504 Yes
552954-506 No
552954-507 Yes
552954-508 No
552954-513 Yes
552954-607 No
552954-608 No
552954-609 No
"Printhead cartridge"
Laminator
Part number Appearance
SP55 SP60
printer? printer?
Yes Yes
Yes Yes
Yes Yes
Yes Yes
Yes Yes
Yes Yes
Yes Yes
Yes Yes
Yes Yes
Yes Yes
Yes Yes
Yes Yes
for details.
Setup.
Type
2
SP75
printer?
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes