Set Limit mode indicator. Displays when the monitor
alarm limit values, or pulse rate values, are being
adjusted.
Adjust Volume mode indicator. Displays when the
monitor alarm volume levels are being adjusted.
Sensor Off Patient indicator. Displays when the monitor
detects the sensor has come off the patient.
SNAP-SHOT DATA ID indicator. An alphanumeric
display that shows the number of the current captured
patient (SpO
ID to the data captured. The ID number is shown in the
%SpO
area of the display.
2
Audible Indicators
The monitor generates auditory signals for use as alarms,
status indicators, and feedback. See Audible Indicators
on page 121.
24
Symbols, Controls, Displays, and Indicators
) and pulse rate (PR) values. It assigns an
2
O
Max N-65 Operator's Manual
XI