Nellcor OxiMax N-65 Operator's Manual page 29

Pulse Search indicator. Displays before initial
acquisition of a pulse signal and throughout prolonged
challenging monitoring conditions. The Indicator
flashes throughout a loss-of-pulse signal.
Data In-Sensor indicator. Displays when the sensor
contains patient alarm events. The indicator flashes when
the sensor memory is full.
Upper Alarm Limit indicator. Indicates that the
displayed value is the upper alarm limit for SpO
Rate.
Lower Alarm Limit indicator. Indicates that the
displayed value is the lower alarm limit for SpO
Rate.
Data indicator. Displays when the monitor is in the store
snap-shot data or data print mode. The indicator flashes
when snap-shot data prints.
Print indicator. Displays when the monitor is in print
mode. The indicator flashes when the monitor prints
single-event, snap-shot, or patient alarm events data,
which is stored in the sensor.
Sensor Disconnected indicator. Displays when the
patient sensor is disconnected from the monitor.
Alarm Volume Adjust indicator. Displays when the
monitor is in the alarm volume adjust menu.
Pulse Beep Tone Volume Adjust indicator. Displays
when the monitor is in the pulse beep tone volume adjust
menu.
Adjust Time indicator. Displays when the monitor is in
the time/date set menu.
O Max N-65 Operator's Manual
XI
Symbols, Controls, Displays, and Indicators
or Pulse
2
or Pulse
2
23