Nellcor OxiMax N-65 Operator's Manual page 23

Press and hold the Alarm Silence button for three
seconds to display the Alarm Silence Duration menu,
which allows you to adjust the alarm silence interval
from 30, 60, 90, or 120 seconds, or to OFF (alarms
disabled). See Set Alarm Silence Duration on page 53.
The Down Arrow button. Sequentially decreases the
parameter under adjustment by one decrement. If you
press and hold the button for more than three seconds it
may cause the decrement to repeat.
Press the Down Arrow button during normal operation
to decrease the pulse beep volume.
The Data (Record/Print) button. Stores the currently
shown SpO
print the stored snap-shot data, such as a single-event
report, snap-shot, and/or sensor-event data by pressing
the Data button in print mode.
The Menu button. Press repeatedly during normal
operation to display the parameters. Parameters you can
set include:
• high and low SpO
• high and low BPM limits
• alarm volume
• pulse beep volume
• data print
If you do not press any buttons for approximately 30
seconds, the monitor returns to normal operation and
incorporates the selected parameter value.
See Menu Structure on page 107 for additional
information about setting parameters.
O Max N-65 Operator's Manual
XI
Symbols, Controls, Displays, and Indicators
and BPM values (snap-shot data.) You can
2
limits
2
17