Quadra-Fire SAPH-MBK-IPI Installation Manual page 29

Coaxial to Colinear Venting
the coaxial to colinear adapter (dV-46dVa-gCl) is
approved for installations into solid fuel masonry or factory
built fireplaces that have been installed in accordance with
the National, Provincial, State and local building codes.
INLET AIR VENT PIPE
EXHAUST VENT PIPE
Figure 4.31 Coaxial/Colinear Appliance Connector
WARNING! Risk of Fire! Coaxial to colinear venting
configuration may only be used in existing non-combustible
chimney. Installation in any other venting application could
cause fire.
WARNING! Risk of Fire, Explosion or Asphyxiation! Do
NOT connect this gas appliance to a chimney flue serving a
separate solid fuel or gas burning appliance.
• May impair safe operation of this appliance or other
appliances connected to the flue.
• Vent this appliance directly outside.
• Use separate vent system for this appliance.
29 Quadra-Fire • SAPH-MBK-IPI, SAPH-D-PMH-IPI, SAPH-D-MBK-IPI, SAPH-D-CSB-IPI Installation Manual • 2343-980_R8 • 11/14