Secondary Incoming Extension - NEC Univerge SV8100 Features And Specifications Manual

Hide thumbs Also See for Univerge SV8100:

Table of Contents

UNIVERGE SV8100

Enhancements

With Version 3000 or higher system software, the appropriate line key page automatically displays

for incoming calls on the DTL-8LD-1 (DESI-Less) and ITL-320C-1 terminals.

Secondary Incoming Extensions (SIEs) are incoming appearance keys of actual stations assigned in the

system. SIE keys are assigned to programmable function keys and can appear on an individual station,

or multiple stations. Incoming internal calls, ringing DIL/Tie/DID/CO Transfer calls, or call forwarded

calls can be picked up from an SIE.

Calls can be originated from a Secondary Incoming Extension, but the actual station cannot

place or answer calls.

Off-Hook ringing is provided with calls ringing to Secondary Incoming Extensions.

Secondary Incoming Extensions are forwarded when the actual station is set for call

SIE keys can appear on an individual station, or multiple stations.

A station can have more than one SIE key assigned.

Up to 32 calls can be queued waiting on an SIE key.

When a Secondary Incoming Extension call is received and answered while the user is on

an outside line, the first call can be automatically put on hold.

If a trunk call rings a Secondary Incoming Extension, to answer the call, the station must be

programmed with the direct trunk appearance key or an available CAP key and the SIE

must be programmed to allow the call to come off the SIE key and appear on the line or

The same SIE key cannot be programmed on multiple programmable function keys on the

same multiline terminal.

An SIE key does not ring during an Intercom Voice call to the actual station.

If multiple CAR/SIE/VE keys are ringing on a station at the same time, the CAR/SIE/VE key

on the lowest Line Key is answered first.

Secondary Incoming Extension