Transfer Charging Roller; Removing The Transfer Charging Roller - Canon iR2200 Service Manual

CHAPTER 4 IMAGE FORMATION SYSTEM

9.3 Transfer Charging Roller

9.3.1 Removing the Transfer Charging Roller

Do not touch the surface of the
transfer charging roller; other-
wise, faulty images can occur.
1) Remove the feeding assembly.
(p. 5-49P)
2) Pull out the static eliminator [1].
3) Remove the screw [2], and detach the
hinge pin [3].
4) Shift the pre-transfer arm [2] (equipped
with a spring) together with the transfer
charging roller [1] to the left, and de-
tach it to the front.
5) While holding down the post-transfer
arm [3] from above, remove the transfer
charging roller [1] to the front.
When mounting it, be sure to fit
the bottom of the spring of the
pre-transfer arm into the seat
(dent) in the feeder frame [4].
4-30 P
COPYRIGHT © 2001 CANON INC.
[3]
[1]
2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV.0 MAR. 2001
F04-903-01
(1)
(2)
[2]
F04-903-02
[3]
[2]
[1]
[4]