9.4 Charging Roller Solenoid
9.4.1 Removing the Charging Roller Solenoid (SL6)
1) Remove the photosensitive drum unit.
(p. 4-28P)
2) Open the rear cover. (7 screws)
3) Remove the DC controller PCB.
(p. 7-17P)
4) Remove the four screws [1], and detach
the DC controller base [2].
5) Disconnect the two connectors [1] of
the harness.
6) Remove the three screws [2], and shift
the duct unit [3] to the side, and slide it
out to the front.
COPYRIGHT © 2001 CANON INC.
2000 2000 2000 2000
CANON iR2200/iR2800/iR3300 REV.0 MAR. 2001
CHAPTER 4 IMAGE FORMATION SYSTEM
[1]
[2]
F04-904-01
[2]
F04-904-02
[1]
[1]
[1]
[1]
[2]
4-31 P
[3]