Removing The Hdd Unit; Removing The Controller Box Unit - Canon iR2200 Service Manual

5.3.5 Removing the HDD Unit

When removing the HDD unit,
take full care against static elec-
tricity. Do not subject the HDD
unit to impact.
1) Remove the rear cover. (7 screws)
2) Remove the rear right cover. (5 screws)
3) Disconnect the two connectors [1].
4) Remove the eight screws (if the control-
ler cover [3] has been removed, 5
screws); then, detach the HDD unit [2].

5.3.6 Removing the Controller Box Unit

1) Remove the rear cover. (7 screws)
2) Remove the DC controller PCB.
(p. 7-17P)
3) Remove the HDD unit. (See item 5.3.5)
4) Disconnect all the connectors of the
harness.
5) Remove the eight screws [1], and detach
the controller box unit [2].
COPYRIGHT © 2001 CANON INC. 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV.0 MAR. 2001
CHAPTER 7 EXTERNALS AND CONTROLS
[2] [1]
[1]
[1]
[3]
[1]
F07-503-05
[1]
[2]
[1]
F07-503-06
[1] [3]
[1]
[1]
[1]
7-19 P