Sensors; Removing The Original Detection Unit; Removing The Hp Sensor - Canon iR2200 Service Manual

CHAPTER 2 ORIGINAL EXPOSURE SYSTEM

5.3 Sensors

5.3.1 Removing the Original Detection Unit

1) Remove the copyboard glass. (p. 3-11R)
2) Remove the two screws [1], and detach
the motor shield plate [2].
3) Disconnect the connector [3].
4) Remove the six screws [4], and detach
the CCD shield plate [5].
5) Remove the screw [1], and disconnect
the connector [2].
6) Shift the original detection unit [3] to
the rear to detach.
When removing it, be sure to
take full care not to damage the
cable [5].

5.3.2 Removing the HP Sensor

1) Remove the reader rear cover
(5 screws).
2) Remove the left support cover.
3) Remove the two harness bands [1].
4) Remove the screw [1], and detach the
sensor mounting plate [2].
2-24 R
COPYRIGHT © 2001 CANON INC.
[4]
[3]
[4]
[1]
[1]
2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV.0 MAR. 2001
[1]
[5]
[2]
F02-503-01
[4]
F02-503-02
[3]
F02-503-03
[4]
[3]
[2]
[2]