Laser Scanner Assembly; Removing The Laser Unit - Canon iR2200 Service Manual

5.1 Laser Scanner Assembly

5.1.1 Removing the Laser Unit

1) Remove the delivery tray. (p. 7-13P)
2) Open the harness guide [1], and discon-
nect the two connectors [2].
3) Disconnect the connector [3] of the BD
PCB and the two connectors [4] of the
laser PCB.
4) Remove the two springs [1] and two
stepped screws [2] from the left, and re-
move the two screws equipped with a
washer from the right; then, detach the
laser unit.
When mounting the Finisher-J1,
attach the protective sheet [2] by
aligning it against the press line
[1] of the laser unit.
COPYRIGHT © 2001 CANON INC. 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV.0 MAR. 2001
CHAPTER 3 LASER EXPOSURE SYSTEM
[2]
[3]
[1]
F03-501-01
[2]
[1]
F03-501-02
[1]
F03-501-03
[4]
[3]
[1]
[2]
3-9 P