CHAPTER 3 INSTALLATION
2.6 Mounting the Drum Unit
Work
1) Unpack the drum unit, and remove the
two releasing members [1] of the pri-
mary charging roller.
Remove all other packing tape and the
like.
1. Do not touch the dump area
of the photosensitive drum to
avoid damage.
2. Take care not to expose the
photosensitive drum to strong
light.
3. Take care not to damage the
stirrups found at the bottom
of the drum unit.
2) Check to make sure that the developing
assembly is released; then, holding the
drum unit [1] by its long hole, slide in-
side the machine along the rails [2].
At this time, take full care not to bring
the developing assembly in contact with
the developing cylinder, which is situ-
ated nearby.
3-10 S
COPYRIGHT © 2001 CANON INC.
Checks/remarks
2000 2000 2000 2000
CANON iR2200/iR2800/iR3300 REV.0 MAR. 2001
[1]
[2]
[1]